GAS GAS EC 350F, Owner'S Manual

Page: 119 / 150

SERVICE WORK ON THE ENGINE 18
117
F03264-10
–
Remove screw plug
3
with oil screen
4
and the O-rings.
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and the sealing surfaces.
F03265-10
–
Position oil screen
4
with the O-rings on a pin wrench.
–
Position the pin wrench through the drill hole of the screw plug in
the opposite section of the engine case.
–
Push the oil screen all the way into the engine case.
F03264-11
–
Mount and tighten screw plug
3
with the O-ring.
Guideline
Screw plug, oil screen M20x1.5 15 Nm (11.1 lbf ft)
–
Mount and tighten oil drain plug
1
with the magnet and a new
seal ring.
Guideline
Oil drain plug with
magnet M12x1.5 20 Nm (14.8 lbf ft)
F03266-10
–
Remove screws
5
. Remove the oil filter cover with the O-ring.
F03267-10
–
Pull oil filter
6
out of the oil filter housing.
Lock ring plier (51012011000)
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and the sealing surface.