background image

MGC Pump User’s Manual

UM-MGC-P v1.06 

19 of 19

Note: 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of 

the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference when the equipment 

is operated in a commercial environment.  This equipment generates, uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

 

   

 

              

LIMITED WARRANTY

Gas Clip Technologies (“GCT”) warrants this product to be free from defects in material and workmanship under normal use 

and service for a period of two years beginning upon the date of activation for all Multi Gas Clip products. Date of activation 

allowance is limited to the “Activate before…” date provided on the shipment box label. This warranty extends only to the 

sale of new and unused products to the original buyer. GCT’s warranty obligation is limited, at GCT’s option, to refund of 

the purchase price, repair, or replacement of a defective product that is returned to a GCT authorized service center within 

the warranty period. In no event shall GCT’s liability hereunder exceed the purchase price actually paid by the buyer for the 

product. This warranty does not include: (1) Fuses, disposable batteries, or routine replacement of parts due to the normal 

wear and tear of the product arising from use. (2) Any product which in GCT’s opinion, has been misused, altered, neglected 

or damaged by accident or abnormal conditions of operation, handling, or use. (3) Any damage or defects attributable to 

repair of the product by any person other than the authorized dealer, or installation of unapproved parts on the product. 

The obligations set forth in this warranty are conditional on: (1) Proper storage, installation, calibration, use, maintenance, 

and compliance with the user’s manual instructions and any other applicable recommendations of GCT. (2) The buyer 

promptly notifying GCT of any defect and, if required, promptly making the product available for correction. No goods shall 

be returned to GCT until receipt by the buyer of instructions from GCT. (3) The right of GCT to require that the buyer provide 

proof of sale or packing slip to establish that the product is within the warranty period. The buyer agrees that this warranty 

is the buyer’s sole and exclusive remedy and is in lieu of all other warranties, expressed or implied, including, but not 

limited to, any implied warranty or merchantability or fitness for a particular purpose. GCT shall not be liable for any special, 

indirect, incidental, or consequential damages or losses, including loss of data, whether arising from breach of warranty 

or based on contract, tort, or reliance on any other theory. Some countries or states do not allow limitation of the term of 

an applied warranty, or exclusion or limitation of incidental or consequential damages. The limitations and exclusions of 

this warranty may not apply to every buyer. If any provision of this warranty is held invalid or unenforceable by a court of 

competent jurisdiction, such holding will not affect the validity or enforceability of any other provision. 

Gas Clip Technologies, Inc.

305 W. FM 1382, Ste. 540, Cedar Hill, TX 75104

Phone:  +1 (972) 775-7577   •   Toll Free:  1 (877) 525-0808  •   Fax:  +1 (972) 775-2483

[email protected]   •  www.gascliptech.com

Summary of Contents for Infrared






















Reviews: