GarrettCom Magnum 6K25 Hardware Installation And User'S Manual Download Page 62 | Manualshive

Page: 62 / 68

background image

Magnum 6K25 Managed Fiber Switch Installation and User Guide (04/06)

55

www GarrettCom com

.

.

GarrettCom reserves the right to charge for the testing of non-defective

units under warranty. Testing and repair of product that is not under warranty will
result in a customer (user) charge.

6.4

Shipping and Packaging Information

Should you need to ship the unit back to GarrettCom, please follow these

instructions:

1. Package the unit carefully. It is recommended that you use the original

container if available. Units should be wrapped in a "bubble-wrap" plastic
sheet or bag for shipping protection. ( You may retain all connectors and this
Installation Guide.)

CAUTION

:

Do not pack the unit in Styrofoam "popcorn" type packing

material. This material may cause electro-static shock damage to the unit.

2. Clearly mark the Return Material Authorization (RMA) number on the

outside of the shipping container.

3. GarrettCom is not responsible for your return shipping charges.

4. Ship the package to:

GarrettCom,

Inc.

47823 Westinghouse Dr.

Fremont, CA 94539-7437

Attn.: Customer Service

APPENDIX A: WARRANTY INFORMATION

GarrettCom, Inc. warrants its products to be free from defects in materials

and workmanship for a period of three (3) years from the date of shipment by
GarrettCom.

During this warranty period, GarrettCom will repair or, at its option,

replace components in the products that prove to be defective at no charge other
than shipping and handling, provided that the product is returned pre-paid to
GarrettCom.

This warranty will not be effective if, in the opinion of GarrettCom, the

product has been damaged by misuse, misapplication, or as a result of service or
modification other than by GarrettCom.

GarrettCom reserves the right to make a charge for handling and

inspecting any product returned for warranty repair which turns out not to be
faulty.

Please complete the warranty card as this acts as a product registration,

and mail it to GarrettCom within two weeks of your purchase.

APPENDIX B : Internal DC Power Supply Options

B1.0

SPECIFICATIONS FOR MAGNUM 6K25 SWITCHES, DC POWER

Power Supply (Internal -48VDC Option)

DC Power Connector: 3 terminals: “

-

“, “GND”, “+”

«
...
60
61
62
63
64
...
»

Summary of Contents for Magnum 6K25





































































Reviews:

No comments

Related manuals for Magnum 6K25

Brand: IDEC Pages: 8

Brand: IDEM SAFETY SWITCHES Pages: 2

Brand: Xantech Pages: 2

DES-3224 - Switch

Brand: D-Link Pages: 75

Edison Cooper Power Series

Brand: Eaton Pages: 12

Brand: IPGARD Pages: 2

Brand: DirectConnect Pages: 10

Brand: Phonocar Pages: 2

Brand: Campbell Hausfeld Pages: 4

SmartSTACK ETHERNET ELS10-27

Brand: Cabletron Systems Pages: 126

Instant On 1930 Series

Brand: Aruba Pages: 8

Brand: rako Pages: 5

Brand: IPGARD Pages: 2

Brand: Veris Industries Pages: 2

Brand: Allied Telesis Pages: 56

ScatterBox POE308

Brand: System Q Pages: 2

Brand: Net Optics Pages: 20

SW-HBT-C6POE-16X16E

Brand: Avenview Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands