GarrettCom Magnum 6K25 Hardware Installation And User'S Manual Download Page 12

Page: 12 / 68

Magnum 6K25 Managed Fiber Switch Installation and User Guide (04/06)

www GarrettCom com

For Gigabit module configuration options

GBPM-COTX

One slot Gigabit 6K module for 6K25 Switches, uses one 6K25 slot and

provides one GBIC open transceiver port for a user-selectable GBIC transceiver module

GBIC-SXSC

GBIC transceiver module for use in GBPM-xOTX, one 1000BASE-SX

port with mm SC fiber connector

GBIC-LXSC10

GBIC transceiver module for use in GBPM-xOTX, one 1000BASE-

LX/LH port with 1310nm sgl. mode SC(10km) fiber connector

GBIC-LXSC25

GBIC transceiver module for use in GBPM-xOTX, one 1000BASE-

LX/LH port with 1310nm sgl. mode SC(25km) fiber connector

GBIC-LXSC40

GBIC transceiver module for use in GBPM-xOTX, one 1000BASE-ZX

port with 1550nm, sgl. mode SC(40km) fiber connector

GBIC transceiver module for use in GBPM-COTX, one LX port with mm SC fiber
connector

GBIC-LXSC70

GBIC transceiver module for use in GBPM-xOTX, one 1000BASE-ZX

port with 1550nm, sgl. mode SC(70km) fiber connector

GBIC-TP

GBIC transceiver module for use in GBPM-xOTX, one 802.3ab

1000BASE-T port, RJ-45 connector

6KM-BLNK

Blank cover for one 6K25 (A,B,or C) module slot opening in a

Magnum 6K25 or 6K25R chassis

CONSOLE CBL

Industry standard serial cable, DB-9 connectors for RS-232 “ null-

modem “ connection (sometimes called an Xmodem cable), used to connect a PC or a
character terminal to the Management port.

CONSOLE USB

Console attachment cable, serial to USB, cable with one DB9 for the

managed Switch and a USB interface for the USB connector to a PC.

6K PoE Modules with 48VDC Pass-Through

Configuration options: only one A, B or C module slot of 6K-Series switch with
48VDC power input may be configured with a PoE Modules

New P6KP8-RJ45

8 port PoE module for 6ks with 48vdc PS, w/eight PoE power source

10/100 auto-negotiating auto cross RJ-45 ports.

New P6KP8-45RJ

“4+4” port PoE module for 6ks with 48vdc PS, w/four PoE power

source and four 10/100 auto-negotiating auto cross RJ-45 ports

New P6KP8-45MT

“4+4” port PoE module for 6ks with 48vdc PS, w/four PoE power

source and four 100 Mb 2km mm FX MTRJ connectors

New P6KP8-45MLC

“4+4” port PoE module for 6ks with 48vdc PS, w/four PoE power

source and four 100 Mb 2km mm FX LC connectors

New P6KP8-45SLC

“4+4” port PoE module for 6ks with 48vdc PS, w/four PoE power

source and four 100 Mb 15km sm FX LC connectors

New P6KP8-45-2MT

“6+2” port PoE module for 6ks with 48vdc PS, w/four PoE power

source and two normal RJ-45 10/100 ports +two100 Mb 2km mm FX MTRJ connectors

New P6KP8-452SLC

“6+2” port PoE module for 6ks with 48vdc PS, w/four PoE power

Summary of Contents for Magnum 6K25





































































Search results

Summary of Contents for Magnum 6K25

Reviews:

Related manuals for Magnum 6K25

Brands by name

Popular brands

GarrettCom Magnum 6K25, Hardware Installation And User'S Manual

Search results

Summary of Contents for Magnum 6K25

Reviews:

Related manuals for Magnum 6K25

Brands by name

Popular brands