GarrettCom Magnum 10KG Installation And User Manual Download Page 9

Page: 9 / 51

Magnum 10KG Managed Switch Installation and User Guide

07/12

www GarrettCom com

1.2 Ordering

Information

Hot-Swap Power supply models, w/Thermal Fins

MODEL

DESCRIPTION

10KG-HSPHH-TF

Magnum 10KG Managed Switch, front-mount, with two PS

slots for two H Hot-Swap Power Supplies. May be factory-configured with a

variety of fiber and copper port modules selected designed specifically for the

10KG-series. Configure up to 24 ports in a mix of Gb and 100Mb. Heavy-duty case

with thermal fins for maximum convection cooling efficiency in a rack-mount

setting.

10KGR-HSPHH-TF

Same as Model 10KG-HSPHH-TF except chassis is a Reverse

Mount unit. (All signal and power cables are in the rear)

10KG-HSPHL-TF:

Magnum 10KG Managed Switch, front-mount, with two PS

slots for one H and one L Hot-Swap Power Supply. May be factory-configured with

a variety of fiber and copper port modules selected designed specifically for the

10KG-series. Configure up to 24 ports in a mix of Gb and 100Mb. Heavy-duty case

with thermal fins for maximum convection cooling efficiency in a rack-mount setting.

10KGR-HSPHL-TF

Same as Model 10KG-HSPHL-TF except chassis is a Reverse

Mount unit. (All signal and power cables are in the rear)

10KG-HSPLL-TF

Magnum 10KG Managed Switch, front-mount, with two PS

slots for two L Hot-Swap Power Supplies. May be factory-configured with a variety

of fiber and copper port modules selected designed specifically for the 10KG-series.

Configure up to 24 ports in a mix of Gb and 100Mb. Heavy-duty case with thermal

fins for maximum convection cooling efficiency in a rack-mount setting.

10KGR-HSPLL-TF

Same as Model 10KG-HSPLL-TF except chassis is a Reverse

Mount unit. (All signal and power cables are in the rear)

Hot-Swap Power supply models, wo/Thermal Fins

MODEL DESCRIPTION

10KG-HSPHH

Magnum 10KG Managed Switch, front-mount, with two PS

slots for two H Hot-Swap Power Supplies. May be factory-configured with a

variety of fiber and copper port modules selected designed specifically for the

10KG-series. Configure up to 24 ports in a mix of Gb and 100Mb.

10KGR-HSPHH

Same as Model 10KG-HSPHH except chassis is a Reverse

Mount unit. (All signal and power cables are in the rear).

10KG-HSPHL:

Magnum 10KG Managed Switch, front-mount, with two PS

slots for one H and one L Hot-Swap Power Supply. May be factory-configured with

a variety of fiber and copper port modules selected designed specifically for the

10KG-series. Configure up to 24 ports in a mix of Gb and 100Mb.

10KGR-HSPHL

Same as Model 10KG-HSPHL except chassis is a Reverse

Mount unit. (All signal and power cables are in the rear).

10KG-HSPLL

Magnum 10KG Managed Switch, front-mount, with two PS

slots for two L Hot-Swap Power Supplies. May be factory-configured with a variety

of fiber and copper port modules selected designed specifically for the 10KG-series.

Configure up to 24 ports in a mix of Gb and 100Mb.

10KGR-HSPLL

Same as Model 10KG-HSPLL except chassis is a Reverse

Mount unit. (All signal and power cables are in the rear)

Summary of Contents for Magnum 10KG




















































Search results

Summary of Contents for Magnum 10KG

Reviews:

Related manuals for Magnum 10KG

Brands by name

Popular brands

GarrettCom Magnum 10KG, Installation And User Manual

Search results

Summary of Contents for Magnum 10KG

Reviews:

Related manuals for Magnum 10KG

Brands by name

Popular brands