GarrettCom Magnum 10KG Installation And User Manual Download Page 18 | Manualshive

Page: 18 / 51

background image

Magnum 10KG Managed Switch Installation and User Guide

07/12

13

www GarrettCom com

.

.

2.3

Managed Network Software for Magnum 10KG

The Magnum 10KG comes with licensed MNS-6K software or MNS-6K-SECURE,
which allow the user to configure the Magnum 10KG as a Managed Switch and
implements security features and other software-enabled features.

(NOTE: Magnum 10KG managed switch will work with MNS-6K Rel v4.4.1
firmware or higher version only, or MNS-6K-SECURE v14.4.1 firmware or higher
version only. Using any earlier MNS-6K Rev-level versions will not provide support
for the Magnum 10KG switch)

For additional information about MNS-6K, see the Magnum MNS-6K

Software User guide

in pdf format, a separate document normally accessible via your

web-browser, at

ftp://ftp.garrettcom.com/

or FTP client program at

ftp.GarrettCom.com

using

user : m6kuser

password : m6kuser

All MNS-6K software information, and the documentation related to MNS-6K and MNS-
6K-SECURE software,

can be accessed at GarrettCom’s FTP site.

Alternatively, for the latest documentation and information,

or needed

GarrettCom’s MIBs

for SNMP, visit

www.GarrettCom.com/techsupport/index.htm#software

and look for the

Magnum MNS-6K info.

For interactive training software which shows basic and advanced info about

the Magnum MNS-6K management software and for a useful tool for first time users,
visit

Magnum MNS-6K Operator Training

.

You may also email:

[email protected]

for further information.

«
...
16
17
18
19
20
...
»

Summary of Contents for Magnum 10KG




















































Reviews:

No comments

Related manuals for Magnum 10KG

Brand: Brightlink Pages: 33

Brand: Perel Pages: 4

RMQ-Titan M30 Series

Brand: Eaton Pages: 4

LS-5500-28C-PWR-SI-OVS

Brand: H3C Pages: 86

Brand: Z-Band Pages: 13

Brand: Barksdale Pages: 6

Enova DGX 100 Series

Brand: AMX Pages: 2

Brand: Emulex Pages: 75

Brand: Alaxala Pages: 249

Brand: KTI Pages: 16

Brand: Gefen Pages: 9

Brand: IDK Pages: 81

Brand: IC Audio Pages: 41

Brand: Cisco Pages: 4

Catalyst WS-X6704-10GE

Brand: Cisco Pages: 7

Brand: Cisco Pages: 16

Cisco Small Business Unmanaged Switch SD208

Brand: Cisco Pages: 2

Brand: Cisco Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands