GarrettCom Magnum 10KG Installation And User Manual Download Page 7

Page: 7 / 51

Magnum 10KG Managed Switch Installation and User Guide

07/12

www GarrettCom com

1000BASE-LX,

full-duplex, multimode (50, 62.5

m cable) - 550m (1804 ft)

1000BASE-LX, full-duplex, singlemode (9

m cable) - 5km (16.4K ft)

1000BASE-ZX,

full

duplex, singlemode (9

m cable) - >70km (229.6K ft)

Fiber Multimode connector types supported:

Fiber Port, LC-type (plug-in): SFF fiber multimode 100BASE-FX

Fiber Port, MTRJ-type (plug-in): SFF fiber multimode 100BASE-FX

Fiber Port, SC-type (plug-in), multimode 100BASE-FX

Fiber Port, ST-type (twist-lock), multimode 100BASE-FX

Fiber Port, 1000BASE-SX, SFP modules

Fiber Singlemode connector types:

Fiber Port, LC-type, Fiber SFF singlemode, 100BASE-FX

Fiber Port, SC-type, singlemode, 100BASE-FX

Fiber Port, 1000BASE-LX, SFP modules

LEDs:

Per

Port

(see section 5.1.1 for detailed LED configurations)

Operating

Environment

Ambient Temperature:

-40

to 140

F (-40

to 60

C) for UL 60950 and Component Parts rating

-40

to 185

F (-40

to 85

C) for IEC 60068 Type Test short term rating

Storage Temperature: -40

to 185

F (-40

to 85

Ambient Relative Humidity: 5% to 95% (non-condensing)

Altitude: -200 to 13,000 ft. (-60 to 4000m)

Conformal Coating (humidity protection) optional: Request quote

Alarm Relay Contacts

Form C, One NC hardware controllable, One NC software controllable

10KGP (PoE chassis): One Form C, NC/NO software controllable

Mechanical (Thermal fin version)

Enclosure: High strength steel, 1.5U rack-mounting or stand-alone
Dimensions: 2.63 in H x 17.5 in W x 12.0 in D

(6.7 cm H x 44.5 cm W x 30.5 cm D)

Cooling method: Convection, special (patent pending) thermal techniques

or Fan cooling

Weight: 14.2 lbs. (6.5 kg)

Mechanical (non-Thermal fin version)

Enclosure: High strength steel, 1U rack-mounting or stand-alone
Dimensions: 1.74 in H x 17.5 in W x 12.0 in D

(4.4 cm H x 44.5 cm W x 30.5 cm D)

Cooling method: Convection, special (patent pending) thermal techniques

or Fan cooling

Weight: 9.7 lbs. (4.4 kg)

Summary of Contents for Magnum 10KG




















































Search results

Summary of Contents for Magnum 10KG

Reviews:

Related manuals for Magnum 10KG

Brands by name

Popular brands

GarrettCom Magnum 10KG, Installation And User Manual

Search results

Summary of Contents for Magnum 10KG

Reviews:

Related manuals for Magnum 10KG

Brands by name

Popular brands