A
PPENDIX
B -
Network Commands
Async Services
DS2000-TS Administrator’s Guide
B - 28
Figure B-24. X.3 Parameter Values
Table B-7. PAD Profile Parameters
Field Description
Built-in profiles
Lists the two ITU-T (CCITT) defined profiles that
are available in the
DS2000-TS
(91 [transparent]
and 90 [simple]). These profiles cannot be
changed.
Profile Name
The profile name is optional; it provides a brief
identification for the profile. The name can also be
used in the X.28 PROF command instead of the
profile number.
Profile # for Initial
Values
The profile number that you use as the basis for
setting the X.3 parameters. If the profile named in
this column is later changed or deleted, the
parameters for this profile do not change.
Optional Description
This field is optional and can be used to enter up to
32 characters describing the device that uses the
profile or the circumstances under which you use
the profile.
*** X.3 Parameter Values ***
Profile 89(14)CRT Enter value Permitted values
1: PAD recall 1 0-no escape, 1-DLE, 32-126 define char
2: PAD echo 1 0-no echo, 1-echo
3: Data forwarding chars 2 0, 1, 2, 4, 8, 16, 32, 64, 128, 3-255
4: Idle timer 0 0-disabled, 1-250 * 50mS, 251-255 10-50mS
5: Flow control by PAD 1 0-no use of XON/XOFF, 1-use XON/XOFF
6: PAD service signals 5 0-none, 1-no prompt, 5-prompt & *, 8-15
7: Break handling 0 0, 1, 2, 5, 8, 21
8: Discard output 0 0-normal delivery, 1-discard
9: Padding after CR 0 0-none, 1-255 padding characters
10: Line folding 0 0-none, 1-255 graphic characters per line
12: Flow control of PAD 1 0-no use of XON/XOFF, 1-use XON/XOFF
13: LF after CR 4 0, 1, 4, 5, 6, 7
14: Padding after LF 0 0-none, 1-255 padding characters
15: Editing 1 0-none, 1-editing in data transfer
16: Character delete 127 0-126 IA5 character, 127-DEL
17: Line delete 24 0-23 & 25-127 IA5 character, 24-CAN
18: Line display 18 0-17 & 19-127 IA5 character, 18-DC2
19: Editing signals 2 0-none, 1-printing, 2-display terminal
20: Echo mask 240 0, 1, 2, 4, 8, 16, 32, 64, 128, 3-255
21: Parity treatment 3 0-none, 3-checking and generation
22: Page wait 0 0-disabled, 1-255 LFs
Press ESC to abort command & exit Process selections (Y/N): Y
