A
PPENDIX
A -
Port Functions
Configuration
DS2000-TS Administrator’s Guide
A - 10
Figure A-8. Virtual PAD Port Configuration Screen
A.2.4 Console Port Configuration
From the
Port Menu
, type in
<CON>
and press
<Enter>
. From the Functions for Port n menu, select
<1>
Configuration
and press
<Enter>
. The parameters on this menu (shown in
) are described in
Table A-5
. This port is always configured for the console and is a fixed DTE interface. Although this port is
primarily used for access to the Supervisor Management system, this port can also be used to host Telnet
sessions (using port 23) and can be used to PING IP devices.
*** Async Port Configuration ***
Port: 10 Virtual PAD
Set M-bit on full Pkt: N Inactivity timer: 0
Max port forward limit: (1-1024) (0, 1-30min, 31-255 out)
Port signalling: TERM Forwarding Character: (0x00 - 0x7F)
_________[DynaStar_6b2c]__________ Process selections (Y/N): Y
Use <TAB> and CURSOR to move fields Press ESC to return to previous menu
Use <CTRL-D> to delete entry
