Garrett GTI 2500, Owner'S Manual

Page: 35 / 105

First Method: While in the OPERATE
mode press the (+) and (-) touchpads
to position the blinking cursor above the
Discrimination Segment corresponding to
the particular target to be detected or
ignored.
If the segment is turned on (showing),
that particular target will be detected. If
you wish to reject that type target, press
the ACCEPT/REJECT touchpad. The seg-
ment will be turned OFF and disappear,
creating a "reject notch." If the Lower
Scale segment is not showing, press the
ACCEPT/REJECT touchpad to turn it ON,
creating an "accept notch," and your GTI
will sound off on targets represented by
that segment.
Second Method: While in the OPERATE
mode, pass the searchcoil over an object
to be accepted or rejected as a target or
pass the particular target across the face
of the coil about two inches away.
Check to make certain of the location of
the target cursor on the Upper Scale.
Graphic Target Imaging 2500 - 5