Garrett GTI 2500 Owner'S Manual Download

Page: 50 / 105

50 - Garrett Metal Detectors

You will probably prefer to use this mode

when searching for nuggets or at other

times when highly mineralized ground is

encountered. Because the All-Metal mode

permits no discrimination, your detector

will give an audible signal to indicate every

piece of metal it scans over.

Even though precise ground balance is

adjusted automatically and continuously

through

Fast Track

and

Auto Track

, it is

possible to ground balance the detector

manually.

Fast Track

ground balancing is accom-

plished by pressing and holding the ALL-

METAL/

Fast Track

touchpad while "bounc-

ing" the searchcoil from two to eight

inches above the ground. When there is a

minimal audio response from the ground,

release the touchpad and begin hunting.

When the touchpad is released, Auto Track

continues to make all adjustments neces-

sary to eliminate ground minerals from

detection.

The speed of the Auto Track function can

be increased by using the (+) touchpad or

Summary of Contents for GTI 2500










































































































Search results

Summary of Contents for GTI 2500

Reviews:

Related manuals for GTI 2500

Brands by name

Popular brands

Garrett GTI 2500, Owner'S Manual

Search results

Summary of Contents for GTI 2500

Reviews:

Related manuals for GTI 2500

Brands by name

Popular brands