Garrett GTI 2500 Owner'S Manual Download

Page: 15 / 105

Graphic Target Imaging 2500 - 15

Treasure Imaging (Pinpoint)

When pressed and held, activates the

automatic pinpointing function in either

mode with signal strength shown on Upper

Scale, depth of target on Lower Scale and

size and depth of target on the Imaging

Grid.

Operate

Returns to operate (hunting) mode after

any change or adjustment of controls.

Discriminate (Last Mode)

When hunting in a Discriminate mode,

returns detector to the previous

Discriminate mode (Coins, Jewelry, Relics,

Zero, Custom) that was being used. When

hunting in the All-Metal mode, press-

ing this button activates the Discriminate

mode that was last being used.

Backlight

Press and release to switch the backlight

on and off. Use the

GTI 2500

's backlight in

low light situations to illuminate the LCD

screen for improved visibility and target

information.

Summary of Contents for GTI 2500










































































































Search results

Summary of Contents for GTI 2500

Reviews:

Related manuals for GTI 2500

Brands by name

Popular brands

Garrett GTI 2500, Owner'S Manual

Search results

Summary of Contents for GTI 2500

Reviews:

Related manuals for GTI 2500

Brands by name

Popular brands