Garrett GTI 2500 Owner'S Manual Download

Page: 101 / 105

Graphic Target Imaging 2500 - 101

CODE OF ETHICS

Filling holes and obeying no trespassing

signs are but two requirements of a dedi-

cated metal detector hobbyist. A sincere

request that Charles Garrett makes to

every user of one of his detectors is that

each place searched be left in a better

condition than it was found. Thousands of

individuals and organizations have adopt-

ed this formal Metal Detector Operators

Code of Ethics:

• I will respect private and public property,

all historical and archaeological sites and

will do no metal detecting on these lands

without proper permission.

• I will keep informed on and obey all laws,

regulations and rules governing federal,

state and local public lands.

• I will aid law enforcement officials when-

ever possible.

• I will cause no willful damage to property

of any kind, including fences, signs and

Summary of Contents for GTI 2500










































































































Search results

Summary of Contents for GTI 2500

Reviews:

Related manuals for GTI 2500

Brands by name

Popular brands

Garrett GTI 2500, Owner'S Manual

Search results

Summary of Contents for GTI 2500

Reviews:

Related manuals for GTI 2500

Brands by name

Popular brands