18
19
EN
EN
Assembly instructions for installer /
Step-by-Step installation
Assembly instructions for installer /
Step-by-Step installation
(figure 7)
(figure 8)
1.
Read Safety Instructions
All installation must be carried out by a qualified installer and comply
with local installation regulations.
2.
Ensure the supply cable is isolated
Turn off input power at the circuit breaker before installing, configuring
or cleaning of the GLB+ Wallbox.
3.
Remove the drill template from the packaging (refer to Box Contents)
4.
Attach the drill template to the wall where the charger will be installed.
Suitable height - refer to Technical Data.
Do not install or use the GLB+ Wallbox near flammable, explosive,
harsh, or combustible materials, chemicals, or vapors.
Avoid mounting the wall box in direct sunlight. The charging current
will be reduced to 16A if the temperature limit inside the wallbox is
exceeded. Charging can also be completely turned off should the
wallbox be too hot, this is a safety feature to ensure a long life-time of
the product.
Step-by-Step Installation
5.
Drill/mark in accordance with the instructions on the drill template.
6.
Unlock the front cover with the key provided and slide the cover downwards.
7.
The front cover has a built-in stop-position. To move past this position, grip the
underside of the cover and lift outwards gradually while pulling downwards.
8.
Loosen the seven screws and carefully remove the cover from the back panel.
