Message
Description
Error connecting server.
Booting interrupted !
Please call support.
Message displayed during the startup of the
charging station if the backend server reject the
connection.
Error connecting to RFID reader.
Booting interrupted !
Please call support.
Message displayed during the startup of the
charging station if the RFID module does not work.
Please contact support.
Error connecting to Communication Control Unit.
Booting interrupted !
Please call support.
Message displayed during the startup of the
charging station if the CCU board does not work.
Please contact support.
Error connecting to AC Unit.
Booting interrupted !
Please call support.
GARO ATLE CCS + C AC only: Message displayed
during the startup of the charging station if the AC powershare
board does not work. Please contact support.
AC contactor failed.
Please unplug any connected vehicle and call support.
GARO ATLE CCS + C AC only: Message displayed
during the startup of the charging station if the AC powershare
board does not work. Please contact support.
Charger inoperative. Cannot charge here.
Charger inoperative. Backend server request charger does not
accept charge
Charger inoperative. Please unplug your vehicle.
Charger inoperative. Backend server request charger does not
accept charge. Unplug the vehicle.
Authorization failed!
Please retry identifying.
User rejected by the backend server.
Charger offline. Set up to refuse offline charging.
Charger offline.
Error timeout. Please unplug your vehicle then
identify.
Time out, user identified, unplug the vehicle before
retrying to identify.
Link established. Waiting for car’s start command...
GARO ATLE CCS + C AC only: This screen can
be displayed when the user is using AC charging. The vehicle
decides when to start charging.
Plug your vehicle to start charging.
Vehicle not detected. Retrying...
X
CHAdeMO only: User identified, waiting for electrical vehicle
connection.
Error: Authorization failed.
You cannot stop the charge session.
The charge cannot be interrupted by this user who
is not recognized by the backend server.
To stop charging, use your RFID card or your application.
User wants to stop the charge. He should identify
himself to be able to switch off the charge and disconnect his
vehicle.
Charge done. Wrong RFID pass. Unplug your vehicle.
Not in CHAdeMO: User not recognized by the backend server...
Charging terminated. Unplug the vehicle.
Charge done. Wrong RFID pass. Please press X once
your vehicle is unplugged.
CHAdeMO only: User not recognized by the backend server...
Charging terminated. Unplug the vehicle.
Station shut down. Please reboot.
Charging station shut down. Please contact support
to restart the charging station.
Updating station... Charging not available.
Charging station is being updated. Please wait.
Error updating. DO NOT CHARGE HERE. Wait for
correct update.
Error updating. Please contact support for updating
the charging station.
Other messages
27
EN
