1. Access to external circuit breaker.
2. Turn off the power at the main breaker panel.
Use padlock, labeling, tagging so that no one switches the power
back on while you’re working.
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC
FLASH
Be sure the supply power is off before starting installation.
Make sure nobody can switch on power during
installation.
Failure to follow these instructions can result in death or
serious injury.
3. Unlock the door.
4. Open the door.
9. Instal the screws (x8) holding input plate with the
cable gland.
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC
FLASH
Be sure the supply power is off before starting installation.
Make sure nobody can switch on power during
installation.
Failure to follow these instructions can result in death or
serious injury.
Remove the door stand.
10. In order to keep the sealing properties, beware not to jam
the cables and the earth braid in the area shown below during the
closing of the door.
11. Close the door.
12. Lock the door (2 keylocks).
13. Access the external mains circuit breaker.
14. Turn the mains circuit breaker power on.
Note: Charging station is now powered. It will startup, perform a
self-test and will display on its screen when ready to use.
ELECTRICAL CONNECTION GARO ATLE CCS
+ CHAdeMO
17
EN
