Garmin VIEO RV 1050 Series, Owner'S Manual

Page: 50 / 82

Activating a SiriusXM Subscription
1 With the SiriusXM source selected, tune to channel 1.
You should be able to hear the preview channel. If not, check the SiriusXM Connect Tuner and antenna
installation and connections, and try again.
2 Tune to channel 0 to locate the Radio ID.
3 Contact SiriusXM Listener Care by phone at (866) 635-2349 or go to
www.siriusxm.com/activatenow to
subscribe in the United States. Contact SiriusXM by phone at (877) 438-9677 or go to www.siriusxm.ca
/activatexm to subscribe in Canada.
4 Provide the Radio ID.
The activation process usually takes 10 to 15 minutes, but can take up to an hour. For the SiriusXM Connect
Tuner to receive the activation message, it must be turned on and receiving the SiriusXM signal.
5 If the service is not activated within the hour, go to http://care.siriusxm.com/refresh or contact SiriusXM
Listener Care by phone at 1-866-635-2349.
Selecting a Category
You can control which categories of channels are available when using the Category tuning method.
1 With the SiriusXM source selected, select
> Category.
2 Select a category.
Using Replay Mode
You can use Replay Mode to control playback of a SiriusXM broadcast.
NOTE: the device enables Replay Mode automatically when playing saved preset channels.
1 If necessary, select to enable Replay Mode.
changes to , and a progress bar appears.
2 Select an option:
• Select or to resume or pause playback.
• Select to exit Replay Mode.
• Select
or to skip backwards or forwards in increments.
NOTE: if you fast-forward or skip forwards to the end of the progress bar, the stereo exits Replay Mode
automatically and plays the live broadcast.
Alerts
WARNING
Do not read or select alert notifications while driving. Failure to pay attention to the road could result in an
accident involving property damage, personal injury or death.
Alerts such as song alerts or game alerts appear at the top of your screen when using the Music app. Alerts also
appear when viewing the Fusion Media map tool. Some alerts, such as SiriusXM alerts, when viewed from the
map tool may contain only short descriptions of an alert. You can view full alert details from the Music app.
Adding an Artist or Song Alert
You can set alerts for artists and songs so that when a particular song or a song from a particular artist begins
to play on any music channel, you can quickly tune to that channel.
1 While a particular song or a song from a particular artist is playing, select
> Add Alert > Save Artist/Song.
2 Select the song or the artist.
42 Music Playback and Stereo Features