Adjusting the screen brightness
You can adjust the brightness using either the notification panel or the settings menu.
1 Select an option:
• Swipe down twice from the top of the screen to expand the quick settings in the notification panel.
• Select >
>
> Display > Brightness Level.
2 Use the slider bar to adjust the brightness.
Video Tutorials
You can view video tutorials to help you start using your device.
Select >
> Video Tutorials.
Vehicle Profiles
WARNING
Entering your vehicle profile characteristics does not guarantee that your vehicle's characteristics will be
accounted for in all route suggestions or that you will receive the warning icons in all cases. Limitations may
exist in the map data such that your device cannot account for these restrictions or road conditions in all cases.
Always defer to all posted road signs and road conditions when making driving decisions.
Routing and navigation are calculated differently based on your vehicle profile. The activated vehicle profile is
indicated by an icon in the status bar. The navigation and map settings on your device can be customised
separately for each vehicle type.
When you activate a camper vehicle profile, the device avoids including restricted or impassable areas in routes
based on the dimensions, weight and other characteristics you entered for your vehicle.
Adding a vehicle profile
You should add a vehicle profile for each camper to be used with your device.
1 Select > > Vehicle Profile >
.
2 Select your vehicle type:
• To add a motorhome with a permanently attached camper, select Motorhome.
• To add a motorhome pulling a trailer, select Motorhome with Trailer.
• To add a camper pulled behind a passenger vehicle, select Vehicle with Trailer.
3 If necessary, select your trailer type:
• To add a camper pulled using a standard hitch, select Caravan.
• To add a camper pulled using a fifth-wheel hitch, select Fifth Wheel.
NOTE: this trailer type is not available in all areas.
• To add a boat trailer pulled using a standard hitch, select Boat Trailer.
• To add a trailer pulled using a standard hitch, select Caravan.
4 Follow the on-screen instructions to enter the vehicle characteristics.
After you add a vehicle profile, you can edit the profile to enter additional detailed information (
).
Car Profile
The car profile is a preloaded vehicle profile intended for use in an automobile without a trailer. While using the
car profile, the device calculates standard automobile routes, and routing for large vehicles is not available.
Some features and settings specific to large vehicles are not available while using the car profile.
6
Video Tutorials
Summary of Contents for VIEO RV 1050 Series
Page 1: ...VIEO RV850 RV1050SERIES Owner smanual ...
Page 8: ......
Page 81: ......
Page 82: ...support garmin com GUID F2A144DD 76F7 44EF AADF 270AAAC241A9 v3 December 2021 ...