Updating the Software Using the Garmin Express Application
Before you can update your device software, you must download the Garmin Express application.
1 Connect the radar device to your computer using the USB cable.
Garmin Express looks for software updates automatically and sends them to your device.
2 Follow the on-screen instructions.
3 Disconnect the device, and connect it to your eBike or a USB power source.
The radar LED flashes blue and green to indicate the device is updating and may pause during the update.
When the update is complete, the LED flashes green 10 times.
The radar device is not responding
During a ride, if the radar device status LED is solid red, the device is in an error state.
• Make sure the device is within the approved operating temperature range (
).
• Turn the device off, and turn it back on.
• Avoid multiple sources of radar interference.
My phone will not connect to the device
• Bring the device within range of your phone.
• If your devices are already paired, turn Bluetooth off on both devices, and turn it back on.
• If your devices are already paired, remove the Varia eRTL615 from the Bluetooth settings on your phone, and
pair the devices again.
• If your devices are not paired, enable Bluetooth technology on your phone.
• On your phone, open the Varia app, select
to enter pairing mode.
Radar detection does not work indoors
The device is tuned to detect vehicles in an outdoor setting. If you turn on the device indoors, a saturation alert
can occur. When you take the device outdoors, the device resumes normal operation.
The status LED is flashing yellow
If the device status LED flashes yellow while the tail light is on, the device is in demo mode. When the device is
in demo mode, artificial data is generated for demonstration only.
To exit demo mode, select an option:
• Turn the device off, and turn it back on.
• Hold the button for 10 seconds to reset the device.
• Reset the device using the Varia app (
).
The status LED turns red while updating the software
• Check the USB cable, connectors, and ports for damage.
• Turn both devices off, and turn them back on.
• Make sure the device is within the approved operating temperature range (
).
Troubleshooting
15
Summary of Contents for Varia eRTL615
Page 1: ...Varia eRTL615 Owner sManual...
Page 4: ......
Page 21: ......
Page 22: ...support garmin com GUID FE2B50F1 79E3 4F6F 85B9 C3E5D5E56D92 v1 April 2023...
