Quick-Start
13
Making Keypad Entries
Making a character entry to name a Personal Waypoint:
1. Press the
MENU
key to display the ‘Mark Personal Waypoint’ page.
2. Use the
ROCKER
keypad to highlight the waypoint name field and press
ENTER
. The first digit
of the waypoint name is highlighted.
3. Press the
UP
and
DOWN
areas of the
ROCKER
keypad to select the first character (right top
picture). Keep in mind that it may be fastest to use the
DOWN
key to go backwards through
letters and numbers to get the one you are looking for.
4. Press the
RIGHT
area of the keypad to move on to the next digit, or press the
LEFT
area of the
keypad to move back to the left and change a digit that you have already entered.
5. Repeat Steps 3 and 4 until the desired information is shown on the screen (bottom right
picture).
6. Press
ENTER
to accept the new name for the Personal Waypoint.
7. Use the
ROCKER
keypad to highlight
OK
and press
ENTER
to store the Personal Waypoint.
Named Waypoint
Marking a Personal Waypoint
Additional Information
If you wish to clear the entire entry, press the
LEFT
area of the
ROCKER
keypad while the first
character of the entry is highlighted.
