32
Reference
System Setup
The System Setup Pages (top left picture) can be accessed in two ways. All option menus
include
System Setup
as a choice. In addition, at any time you may press the
OPTION
key twice to
display the System Setup. This is a group of pages used to perform various System Setup functions,
including configuring the display and backlighting, units of measure, and setting various alarms. Each
available page is denoted by a ‘file tab’ at the top that identifies the function of that page.
To select a System Setup option:
1. With the System Setup on the screen, highlight the file tab for the desired function. The
associated information and options are automatically displayed when the file tab is highlighted.
2. Once the desired file tab has been selected use the
DOWN
key to highlight the desired option
to view or modify.
3. Press the
ENTER
key to change to a different option. In most cases, a list of available options is
shown (bottom left picture).
4. Use the
ROCKER
keypad to select the desired choice, then press the
ENTER
key again to accept
the change.
5. Use the
UP
key to return to the file tab area and select another file tab, if desired.
At some time, you may desire to change part of the System Setup back to the way it was the
first time you used your StreetPilot. This can be done by selecting the option called
Restore Factory
Settings
.
“Pop Up” Options Windows
System Setup
