Garmin SOCATA TBM850, Cockpit Reference Manual

Page: 28 / 122

Garmin G1000 Cockpit Reference Guide for the Socata TBM 850 190-00708-02 Rev. A
12
nav/Com/xpdr/Audio panel
Flight
Instruments
EAS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal Oper
ation
Annun/
Alerts
Appendix
Index
enter A trAnsponder Code
1)
Press the
XPDR
Softkey to display the transponder mode selection softkeys.
2)
Press the XPDR1 or XPDR2 Softkey to select the active transponder.
3) Press the CODE Softkey to display the transponder code selection softkeys,
for digit entry.
4) Press the digit softkeys to enter the code in the code field. When entering
the code, the next key in sequence must be pressed within 10 seconds, or
the entry is cancelled and restored to the previous code. Five seconds after
the fourth digit has been entered, the transponder code becomes active.
seleCting A Com rAdio
transmit/receive
Press the COM1 MIC or COM2 MIC on the audio panel.
receive only
Press the
COM1
or
COM2
on the audio panel.
seleCting A nAv rAdio
1) To begin navigating using a navigation radio, press the CDI Softkey on the
PFD to select VOR1/LOC1 (NAV1) or VOR2/LOC2 (NAV2).
2) Press the NAV1
,
NAV2
,
DME
,
or ADF Key on the audio panel to select or
deselect the navigation radio audio source. All radio keys can be selected
individually or together.
nAv/Com tuning
1)
Press the small tuning knob to select the desired radio for tuning. A light
blue box highlights the radio frequency to be tuned.
2)
Turn the respective tuning knobs to enter the desired frequency into the
standby frequency field. The large knob enters MHz and the small knob
enters kHz.
3) Press the Frequency Transfer Key to place the frequency into the active
frequency field.