background image

When using Go To, a direct course and a corrected course may 

pass over land or shallow water. Use visual sightings, and steer 

to avoid land, shallow water, and other dangerous objects.

NOTE: 

Auto Guidance is available with premium charts, in 

some areas.

 CAUTION

Garmin recommends using Guide To only under motor power. 

Using Guide To while under sail can cause an unexpected 

gybe, risking damage to the sailboat. Unattended sails and 

rigging can be damaged or cause injury to any crew or 

passengers during an unexpected gybe maneuver.

You can set and follow a course to a destination using one of 

three methods: Go To, Route To, or Guide To.

Go To

: Takes you directly to the destination. This is the 

standard option for navigating to a destination. The 

chartplotter creates a straight line course or navigation line to 

the destination. The path may run over land and other 

obstacles.

Route To

: Creates a route from your location to a destination, 

allowing you to add turns along the way. This option provides 

a straight line course to the destination, but allows you to add 

turns into the route that avoid land and other obstacles.

Guide To

: Creates a path to a destination using Auto Guidance. 

This option is available only when using a compatible 

premium chart in a compatible chartplotter. It provides a turn-

by-turn navigation line to the destination, avoiding land and 

other obstacles. The navigation line is based on the chart 

data and the safe depth, safe height, and shoreline distance 

user-defined chartplotter settings. Using these settings and 

chart data, the chartplotter creates a navigation line that 

avoids all areas that cannot be navigated between the 

present location and the destination. When you are using a 

compatible Garmin autopilot connected to the chartplotter 

using NMEA 2000®, the autopilot follows the Auto Guidance 

route.

Setting and Following a Direct Course Using Go To

 CAUTION

When using Go To, a direct course and a corrected course may 

pass over land or shallow water. Use visual sightings, and steer 

to avoid land, shallow water, and other dangerous objects.

You can set and follow a direct course from your current 

location to a selected destination.

1

Select a destination (

Destinations

).

2

Select 

Navigate To

 > 

Go To

.

A magenta line appears. In the center of the magenta line is 

a thinner purple line that represents the corrected course 

from your current location to the destination. The corrected 

course is dynamic, and it moves with your boat when you are 

off course.

3

Follow the magenta line, steering to avoid land, shallow 

water, and other obstacles.

4

If you are off course, follow the purple line (corrected course) 

to go to your destination, or steer back to the magenta line 

(direct course).

Setting and Following a Course Using Auto Guidance

 CAUTION

The Auto Guidance feature is based on electronic chart 

information. That data does not ensure obstacle and bottom 

clearance. Carefully compare the course to all visual sightings, 

and avoid any land, shallow water, or other obstacles that may 

be in your path.

NOTE: 

Auto Guidance is available with premium charts, in 

some areas.

1

Select a destination (

Destinations

).

2

Select 

Navigate To

 > 

Guide To

.

3

Review the course indicated by the magenta Auto Guidance 

line.

4

Follow the magenta line, steering to avoid land, shallow 

water, and other obstacles.

NOTE: 

When using Auto Guidance, a gray segment within 

any part of the magenta line indicates that Auto Guidance 

cannot calculate part of the Auto Guidance line. This is due 

to the settings for minimum safe water depth and minimum 

safe obstacle height.

Autopilot Navigation

When you start navigation (Go To, Route To, or Guide To), if 

you are connected through a NMEA 2000 network to a 

compatible Garmin autopilot, you are prompted to engage the 

autopilot.

Stopping Navigation

From the Navigation chart or Fishing chart, select 

Menu

 > 

Stop Navigation

.

Waypoints

Waypoints are locations you record and store in the device.

Marking Your Present Location as a Waypoint

From any screen, select 

Mark

.

Creating a Waypoint at a Different Location

1

Select 

Nav Info

 > 

Waypoints

 > 

New Waypoint

.

2

Select an option:
• To create the waypoint by entering position coordinates, 

select 

Enter Coordinates

, and enter the coordinates.

• To create the waypoint using a chart, select 

Use Chart

select the location, and select 

Select

.

Marking and Starting Navigation to an MOB Location

When you mark a waypoint, you can designate it as a man 

overboard (MOB) location.

Select an option:
• From any screen, select 

Mark

 > 

Man Overboard

.

• From the Home screen, select 

Man Overboard

 > 

Yes

.

An international MOB symbol marks the active MOB point and 

the chartplotter sets a direct course back to the marked location.

Viewing a List of all Waypoints

Select 

Nav Info

 > 

Waypoints

.

Editing a Saved Waypoint

1

Select 

Nav Info

 > 

Waypoints

.

2

Select a waypoint.

3

Select 

Edit Waypoint

.

4

Select an option:
• To add a name, select 

Name

, and enter a name.

• To change the symbol, select 

Symbol

.

• To change the depth, select 

Depth

.

• To change the water temperature, select 

Water Temp.

.

• To change the comment, select 

Comment

.

• To move the position of the waypoint, select 

Move

.

Moving a Saved Waypoint

1

Select 

Nav Info

 > 

Waypoints

.

2

Select a waypoint.

10

Navigation with a Chartplotter

Summary of Contents for nuvi 500-Series













































Reviews: