background image

• To view surface wind and barometric pressure 

information, select 

Sea Surface

.

• To view wind and wave information, select 

Marine 

Bulletin

.

Creating a Waypoint on a Weather Chart

1

From a weather chart, select a location.

2

Select 

New Waypoint

.

Weather Overlay

The weather overlay superimposes weather and weather-

related information on the Navigation chart, the Fishing chart, 

and the Perspective 3D chart view. The Navigation chart and 

the Fishing chart can show weather radar, height of cloud tops, 

lightning, weather buoys, county warnings, and hurricane 

warnings. The Perspective 3D chart view can show weather 

radar.
Weather overlay settings configured for use on one chart are 

not applied to another chart. The weather overlay settings for 

each chart must be configured separately.

NOTE: 

The offshore Fishing chart is available with premium 

charts, in some areas.

Turning On the Weather Overlay on a Chart

From the Navigation chart or Fishing chart, select 

Menu

 > 

Chart Setup

 > 

Weather

 > 

Weather

 > 

On

.

Weather Overlay Settings on the Navigation Chart

From the Navigation chart, select 

Menu

 > 

Chart Setup

 > 

Weather

.

Weather

: Turns on and off the weather overlay.

Precipitation

: Shows precipitation data.

Cloud Cover

: Shows cloud cover data.

Buoys

: Shows weather buoys.

Legend

: Shows the weather legend.

Weather Overlay Settings on the Fishing Chart

From the Fishing chart, select 

Menu

 > 

Chart Setup

 > 

Weather

.

Precipitation

: Shows precipitation radar.

Sea Temperature

: Shows sea temperature data.

Buoys

: Shows weather buoys.

Legend

: Shows the weather legend.

Viewing Weather Subscription Information

You can view information about the weather services you have 

subscribed to and how many minutes have passed since the 

data for each service was updated.

Select 

Weather

 > 

Weather Subscription

.

Chartplotter Data Management

Copying Waypoints, Routes, and Tracks to a 

Chartplotter

Before you can copy data to the chartplotter, you must have the 

latest version of MapSource® or HomePort software programs 

loaded on your computer and a memory card installed in the 

chartplotter.

Select an option:
• Copy the data from HomePort to the prepared memory 

card.
For more information, see the HomePort help file.

• Copy the data from MapSource to the prepared memory 

card.

For more information, see the MapSource help file.

Copying Data from a Memory Card

1

Insert a memory card into a card slot.

2

Select 

Nav Info

 > 

Manage Data

 > 

Data Transfer

.

3

If necessary, select the memory card to copy data to.

4

Select an option:
• To transfer data from the memory card to the chartplotter 

and combine it with existing user data, select 

Merge from 

Card

.

• To transfer data from the memory card to the chartplotter 

and overwrite existing user data, select 

Replace from 

Card

.

5

Select the file name.

Copying Waypoints, Routes, and Tracks to a 

Memory Card

1

Insert a memory card into the card slot.

2

Select 

Nav Info

 > 

Manage Data

 > 

Data Transfer

 > 

Save to 

Card

.

3

If necessary, select the memory card to copy data to.

4

Select an option:
• To create a new file, select 

Add New File

, and enter a 

name. The file name is saved with an .adm extension.

• To add the information to an existing file, select the file 

from the list.

Copying Waypoints, Routes, and Tracks to 

or from all Chartplotters on the Network

You can transfer information for waypoints, routes, and tracks 

from one chartplotter connected to the Garmin Marine Network 

to every other chartplotter connected to the network. The 

transfer may take a long time, depending on the number of 

waypoints being transferred.

1

Select 

Nav Info

 > 

Manage Data

 > 

Data Transfer

 > 

Network

.

2

Select an option:
• To transfer data from the chartplotter to the other 

chartplotters connected to the network, select 

Clone User 

Data

. Existing data is overwritten on those chartplotters.

• To transfer data between all the chartplotters connected 

to the network, select 

Merge User Data

. Unique data is 

combined with existing data on every chartplotter.

Copying Built-In Maps to a Memory Card

You can copy maps from the chartplotter to a memory card for 

use with HomePort.

1

Insert a memory card into the card slot.

2

Select 

Nav Info

 > 

Manage Data

 > 

Data Transfer

.

3

Select 

Copy Built-In Map

.

Backing Up Data to a Computer

1

Insert a memory card into the card slot.

2

Select 

Nav Info

 > 

Manage Data

 > 

Data Transfer

 > 

Save to 

Card

.

3

Select a file name from the list, or select 

Add New File

.

4

Select 

Save to Card

.

The file name is saved with an .adm extension.

5

Remove the memory card, and insert it into a card reader 

attached to a computer.

6

Open the Garmin\UserData folder on the memory card.

Chartplotter Data Management

29

Summary of Contents for nuvi 500-Series













































Reviews: