Garmin NavTalk Pilot Pilot'S Manual & Reference Download Page 148

Page: 148 / 176

134

Section 6

GPS Receiver

Reference

2. Select ‘On’ or ‘Off’ (as desired) and press

ENTER

3. If enabling the alarm, highlight the alarm distance

field to the immediate right and press

ENTER

Enter the alarm distance using the

ARROW

keypad

and press

ENTER

I/O—

Interface Settings lets you control the input/

output format used when connecting your unit to
external NMEA devices, a DGPS beacon receiver, or a
personal computer, etc. Five format settings are available:

Aviation In —

allows the NavTalk Pilot to commu-

nicate with a Garmin panel-mounted GPS. Flight
plans (or GOTO destinations) selected on the
panel-mounted GPS will also appear on the
NavTalk Pilot.

GARMIN —

the proprietary format used to exchange

waypoint, route, track log data with a PC or with
another NavTalk Pilot.

NMEA —

supports the input/output of standard

NMEA 0183 version 2.0 data.

None —

provides no interfacing capabilities.

RTCM/NMEA —

allows Differential GPS (DGPS)

input using a standard RTCM format and also
provides NMEA 0183 version 2.0 output.

RTCM In —

allows DGPS input using a standard

RTCM format, without any output capabilities.

RTCM Text —

allows DGPS input using a standard

RTCM format and also provides simple text (ASCII)
output containing position, velocity, and time data
in fixed width fields.

Text Out —

supports simple text (ASCII) output

containing position, velocity, and time data in fixed
width fields (not delimited).

The ‘GARMIN’ option
allows the data exchange
with a PC or another unit.
Use this setting to perform
database updates.

When transferring data
to/from another unit,
select the type of data
and whether to ‘request’
it from or ‘send’ it to the
other unit.

Summary of Contents for NavTalk Pilot

















































































































































































Search results

Summary of Contents for NavTalk Pilot

Reviews:

Related manuals for NavTalk Pilot

Brands by name

Popular brands

Garmin NavTalk Pilot, Pilot'S Manual & Reference

Search results

Summary of Contents for NavTalk Pilot

Reviews:

Related manuals for NavTalk Pilot

Brands by name

Popular brands