190-00734-11
GTX 33X and GTX 3X5 ADS-B Maintenance Manual
Rev. 6
Page B-8
NOTES
Figure B-7 Remote GTX Aluminum Tape Installation
Sheet 1 of 1
GTX 33/33D
6+2:1
7:1 LENGTH-TO-WIDTH RATIO
MEASUREMENT BEGINS AT LAST
POINT OF ELECTRICAL CONTACT
WITH MOUNTING RACK
ALUMINUM PLATE
TO
INS
TRUME
NT
PA
NE
L
AIRCRAFT SECONDARY
STRUCTURE
(E.G. EQUIPMENT SHELF)
ALUMINUM TAPE
GTX 33/33D
6+2:1
AIRCRAFT
STRUCTURE
ALUMINUM PLATE
ALUMINUM TAPE
2
3
1
3
2
1
1
AIRCRAFT SECONDARY STRUCTURE, SUCH AS AN EQUIPMENT SHELF MUST HAVE CLEARANCE ON THE
OPPOSITE SIDE FOR HARDWARE NEEDED TO INSTALL THE GTX 33/33D/3X5R TO THE AIRCRAFT STRUCTURE.
2
RECOMMENDED THICKNESS OF ALUMINUM PLATE IS 0.032". ALUMINUM PLATE LENGTH AND WIDTH MUST BE
AT LEAST 0.5" LARGER THAN THE GTX 33/33D FOOTPRINT (MINIMUM 10.45" X 2.78" FOR SINGLE BONDING PLATE
OR 1.75" X 3.11" FOR OPTIONAL DUAL BONDING PLATES). REMOVE ALL BURRS AND SHARP EDGES, RADIUS ALL
SHARP CORNERS (1.25" MINIMUM, 0.25" RECOMMENDED).
3
GTX 33/33D UNITS MUST BE INSTALLED ON A HORIZONTAL SURFACE, BUT ORIENTATION IS UNRESTRICTED.
