background image

190-00734-11

GTX 33X and GTX 3X5 ADS-B Maintenance Manual

Rev. 6

Page i

© 2013-2017 Garmin International or its subsidiaries

All Rights Reserved

Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, 
disseminated, downloaded or stored in any storage medium, for any purpose without the express prior 
written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual and 
of any revision to this manual onto a hard drive or other electronic storage medium to be viewed and to 
print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this 
manual or revision must contain the complete text of this copyright notice and provided further that any 
unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Garmin

®

 is a registered trademark of Garmin International or its subsidiaries. GDU

 and GTN

 are 

trademarks of Garmin International or its subsidiaries. These trademarks may not be used without the 
express permission of Garmin.

Adobe

®

 is a registered trademark of Adobe Systems Incorporated. All rights reserved.

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use 
of such marks by Garmin is under license. Other trademarks and trade names are those of their respective 
owners.

At Garmin, we value your opinion. For comments about this guide, please e-mail: 

[email protected]

. For comments about Garmin aviation products, email 

[email protected]

.

Garmin International, Inc.
1200 E. 151st Street
Olathe, KS 66062 USA
Telephone: (913) 397-8200

www.garmin.com

Garmin (Europe) Ltd.
Liberty House, Bulls Copse Road
Hounsdown Business Park
Southampton, SO40 9LR, UK
Phone: +44 (0) 23 8052 4000
Fax: +44 (0) 23 8052 4004

Garmin AT, Inc.
2345 Turner Rd., SE
Salem, OR 97302 USA
Telephone: (503) 581-8101

Summary of Contents for GTX GTX 330D






































































































































Reviews: