GTX 33X and GTX 3X5 ADS-B Maintenance Manual
190-00734-11
Rev.
6
Page A-11
GTX 330 POST-INSTALLATION CONFIGURATION LOG
NOTE
A post- installation configuration log is available for the GTX 33 immediately following this
configuration log.
INSTALLATION SETTINGS
(All settings in this section must be the same for each installed transponder)
Voice Setting
Volume
Setting:
Setting:
Message
Altitude Monitor
Setting:
Setting:
Count Down Timer
Page Change
Setting:
Setting:
Traffic Messages
Display Mode/Level
Setting:
Setting:
BKLT Source
KEY
Setting:
Setting:
If
MAN
selected as BKLT Source, the
If
MAN
selected as KEY Source, the
additional fields below must be configured:
additional fields below must be configured:
Level
Level
Setting:
Setting:
Min
Min
Setting:
Setting:
BKLT Source
KEY Source
Setting:
Setting:
Slope
Slope
Setting:
Setting:
Offset
Offset
Setting:
Setting:
RSP Time
RSP Time
Setting:
Setting:
Contrast Mode
VFR Key Configuration
Setting:
Setting:
