GTX 33X and GTX 3X5 ADS-B Maintenance Manual
190-00734-11
Rev.
6
Page A-9
GTX 3X5 POST-INSTALLATION CONFIGURATION LOG
NOTE
This page applies to both GTX 335/335R and GTX 345/345R units. Post-installation configuration logs
specific to each unit are included immediately following this page and must be filled out in addition to this
page for your specific installation.
RS-232 Configuration
Transponder #1
Transponder #2
Port 1:
Input ____________________
Port 1:
Input ____________________
Output ____________________
Output ____________________
Port 2:
Input ____________________
Port 2:
Input ____________________
Output ____________________
Output ____________________
Port 3:
Input ____________________
Port 3:
Input ____________________
Output ____________________
Output ____________________
Only available for GTX 345/345R
Only available for GTX 345/345R
Port 4:
Input ____________________
Port 4:
Input ___________________
Output ____________________
Output ___________________
ARINC 429 CONFIGURATION
Transponder #1
Port 1:
Input ____________________
Speed:
____________________
Output ____________________
Speed:
____________________
Port 2:
Input ____________________
Speed:
____________________
Transponder #2
Port 1:
Input ____________________
Speed:
____________________
Output ____________________
Speed:
____________________
Port 2:
Input ____________________
Speed:
____________________
RS-422 Configuration (Only available for GTX 345/345R)
Transponder #1
Transponder #2
Port 1:
Output ___________________
Port 1:
Output __________________
HSDB Configuration (Only available for GTX 345/345R)
Transponder #1
Transponder #2
Port 1:
__________________________
Port 1:
_________________________
Port 2:
__________________________
Port 2:
_________________________