Garmin GTN 625Xi, Pilot'S Manual

Page: 97 / 534

Get Started
190-02327-03 Rev. C Pilot’s Guide 2-53
Telligence Voice Command
FEATURE REQUIREMENTS
•
Compatible audio panel
Garmin's Telligence Voice Command voice recognition feature allows the pilot and
co-pilot to control the GTN Xi connected to a required GMA 35/350 using spoken
commands. To activate Voice Recognition, push and hold the Push-to-Command
(PTC) switch and speak a command. Release the PTC switch and the GTN Xi and/or
the audio panel responds with a positive acknowledgment chime.
A negative acknowledgment tone plays if a command is not understood or the GMA
and/or GTN Xi is unable to complete the request. Repeat the command by using the
PTC switch, or by manually using the GTN Xi touchscreen. In the event of any
abnormal voice recognition operation, the front panel controls and touchscreen may
be used to override voice recognition and manually control the unit.
PASS/FAIL INDICATIONS
If Telligence Voice Command malfunctions and needs disabling, remove power
from the GMA audio panel. This forces the audio panel into the fail-safe mode.
The pilot can communicate using the COM 2 radio only.
AUDIBLE TONE DEFINITIONS
Ascending
(low to high)
Pass
Command recognized and executed.
Example: “Show Map page” is spoken and moving
map displays
Descending
(high to low)
Fail
Command unrecognizable or invalid.
Example: “Show Map page” is spoken and the
page does not change