Garmin GTN 625Xi, Pilot'S Manual

Page: 207 / 534

Navigation
190-02327-03 Rev. C Pilot’s Guide 3-65
COMMENT FORMAT
Default comments display in a specific format for each reference type.
POSITION TYPE
Set the waypoint position type using one of the following options.
MARK WAYPOINTS
Installations equipped with an external Mark on Target (MOT) switch allow
immediate user waypoint creation by marking the point in space at which the switch
is activated.
These waypoints contain a unique identifier with a sequential three digit number
(“MOT###”) that increments with every push of the MOT switch. If the number
exceeds 999, the counter resets and begins to overwrite identifiers at the beginning
of the list.
Radial/Radial Radial/Distance LAT/LON
Specify a waypoint and
radial for each of the two
reference points.
Specify the reference
waypoint, radial, and
distance.
Specify the point’s
latitude and longitude.
Upon marking a target with an MOT switch, the waypoint may be obscured by the
ownship and not readily visible. In such cases, you may verify waypoint creation by
changing the map zoom level or viewing the User Waypoints page.
LAT/LON Radial/Distance
<LAT> <LON> <Waypoint><Radial> / <Distance>
Radial/Radial
<Waypoint 1><Radial 1> / <Waypoint 2><Radial 2>