Garmin GTN 625Xi, Pilot'S Manual

Page: 383 / 534

Hazard Awareness
190-02327-03 Rev. C Pilot’s Guide 5-75
Traffic Setup
Tap
Menu
to access pilot selectable settings and the self-test functions.
Traffic Test
FEATURE LIMITATIONS
•
ADS-B, TAS, and TCAS applications only
•
Available only when the aircraft is on ground (i.e., standby mode)
•
Test pattern depiction is dependent upon the active traffic system
Altitude Filtering
FEATURE LIMITATIONS
•
ADS-B, TAS, and TCAS applications only
Pilot selectable filters limit the display of traffic to a specific altitude range relative to
the altitude of the ownship.
Filter selections apply to both the Traffic page and the traffic overlay on Map.
SELECTION LABEL ALTITUDE RANGE
Normal NORM -2,700 ft to 2,700 ft
Above ABV -2,700 ft to 9,900 ft
Below BLW -9,900 ft to 2,700 ft
Unrestricted UNR -9,900 ft to 9,900 ft
Normal
Above
Below
Altitude Filter
Unrestricted
Test
TAS/TCAS I
Status
Operate
Standby
TIS‐A
Status
Operate
Standby
Test
ADS‐B
Status
Surface
Airborne
Off
Motion Vector
Absolute
Relative
Off
Vector Duration
Set duration
Normal
Above
Below
Altitude Filter
Unrestricted
Altitude
Reporting
TCAS II
Standby
On
TA Only
TA/RA
Map Traffic Overlay
The overlay control resides in the
Map setup menu.
Home > Map > Menu , and select
Traffic
.
The test function displays a test pattern on the Traffic page.
For ADS-B, this option is accessible via the Traffic menu.