Garmin GTN 625Xi Pilot'S Manual Download Page 241

Page: 241 / 534

Navigation

190-02327-03 Rev. C

Pilot’s Guide

3-99

User Holds

Hold at Waypoint Options

Course

Specify the course angle.

Direction

Select between Inbound or Outbound.

Turn

Select between Left Turn or Right Turn.

Leg Type

Select Time or Distance.

Leg Time

Specify the leg time in minutes and seconds (MM:SS).

Leg Distance

Specify the leg distance.

Expect Further

Clearance (EFC)

Specify a time for the Expect Further Clearance reminder.

Load Hold

Accept the specified hold parameters and return to the
previous window.

Preview

View the defined holding pattern as it will appear on Map.
Available on GTN 650Xi Series units only.

User holds suspend automatic waypoint sequencing until
they expire or are removed.
Tapping

Hold at Waypoint

displays available hold options.

The controls on this page allow you to:

•

Specify course, direction, and turn.

•

Set leg length according to
distance or time.

•

Set up an Expect Further Clearance
reminder.

•

Preview how the defined holding
pattern will appear on Map.

•

Load the specified hold for
activation.

Summary of Contents for GTN 625Xi























































































































































































































































































































































































































































































































































Search results

Summary of Contents for GTN 625Xi

Reviews:

Related manuals for GTN 625Xi

Brands by name

Popular brands

Garmin GTN 625Xi, Pilot'S Manual

Search results

Summary of Contents for GTN 625Xi

Reviews:

Related manuals for GTN 625Xi

Brands by name

Popular brands