Garmin GPSMAP 60CSx Owner'S Manual Download Page 2 | Manualshive

Page: 2 / 116

background image

All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted,

disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin.

Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium

to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this

manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution

of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products and

to make changes in the content without obligation to notify any person or organization of such changes or improvements. Visit the

Garmin Web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this

and other Garmin products.
Garmin

®

, GPSMAP

®

, AutoLocate

®

, TracBack

®

, BlueChart

®

, and MapSource

®

are registered trademarks of Garmin Ltd. or its

subsidiaries and may not be used without the express permission of Garmin.
This product includes technology owned by SiRF Technology, Inc. SiRF’s technology is protected by U.S. and foreign

patents pending and issued. SiRF, SiRFstar and the SiRF logo are registered trademarks of SiRF Technology, Inc.

SiRFstarIII and SiRF Powered are trademarks of SiRF Technology, Inc.
microSD

™

is a trademark of The SD Card Association . TransFlash

™

is a trademark of SanDisk Corporation.

June 2006 Part Number 190-00482-00 Rev. C Printed in Taiwan

© 2005-2006 Garmin Ltd. or its subsidiaries

Garmin International, Inc.

1200 East 151

st

Street,

Olathe, Kansas 66062, U.S.A.

Tel. 913/397.8200 or 800/800.1020

Fax 913/397.8282

Garmin (Europe) Ltd.

Unit 5, The Quadrangle, Abbey Park

Industrial Estate, Romsey, SO51 9DL,

U.K.

Tel. 44/0870.8501241

Fax 44/0870.8501251

Garmin Corporation

No. 68, Jangshu 2

nd

Road, Shijr, Taipei

County, Taiwan

Tel. 886/2.2642.9199

Fax 886/2.2642.9099

«
1
2
3
4
...
»

Summary of Contents for GPSMAP 60CSx





















































































































Reviews:

No comments

Related manuals for GPSMAP 60CSx

Brand: J. W. Davis & Company Pages: 68

Brand: Haicom Pages: 32

GLOBALWATCH UAIS - QUICK

Brand: ACR Electronics Pages: 75

Etrex Legend - GPS Receiver

Brand: Garmin Pages: 76

Navigation Software

Brand: ZENEC Pages: 2

Brand: XAiOX Pages: 17

Brand: Thales Pages: 234

Brand: Oner Pages: 15

GPSMAP 162 Sounder

Brand: Garmin Pages: 99

Brand: Sanav Pages: 26

Brand: Sanav Pages: 43

Brand: Sanav Pages: 45

Brand: Sanav Pages: 79

Brand: Flex Pages: 3

Brand: LENCO Pages: 56

SMART-LINK GPS-T-SL

Brand: Ness Pages: 16

Brand: PORTMAN Pages: 13

Brand: PORTMAN Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands