Garmin GPSMAP 60CSx Owner'S Manual Download

Page: 112 / 116

102

GPSMAP 60CSx Owner’s Manual

PPENDIX

Garmin International, Inc.

1200 E 151st Street, Olathe, Kansas 66062 U.S.A.

Tel. 913/397.8200

Fax. 913/397.8282
Garmin (Europe) Ltd.

Unit 5, The Quadrangle, Abbey Park Industrial Estate,

Romsey, SO51 9DL U.K.

Tel. 44/0870.8501241

Fax 44/0870.8501251

Online Auction Purchases:

Products sold through

online auctions are not eligible for rebates or

other special offers from Garmin. Online auction

conﬁrmations are not accepted for warranty

veriﬁcation. To obtain warranty service, an original or

copy of the sales receipt from the original retailer is

required. Garmin will not replace missing components

from any package purchased through an online

auction.

International Purchases:

A separate warranty

is provided by international distributors for units

purchased outside the United States. This warranty

is provided by the local in-country distributor and

this distributor provides local service for your unit.

Distributor warranties are only valid in the area of

intended distribution. Units purchased in the United

States or Canada must be returned to the Garmin

service center in the United Kingdom, the United

States, Canada, or Taiwan for service.
The Garmin GPSMAP 60CSx has no user-serviceable

parts. Should you ever encounter a problem with your

unit, please take it to an authorized Garmin dealer for

repairs.
The GPSMAP 60CSx is fastened shut with screws.

Any attempt to open the case to change or modify

the unit in any way will void your warranty and may

result in permanent damage to the equipment.

Summary of Contents for GPSMAP 60CSx





















































































































Search results

Summary of Contents for GPSMAP 60CSx

Reviews:

Related manuals for GPSMAP 60CSx

Brands by name

Popular brands

Garmin GPSMAP 60CSx, Owner'S Manual

Search results

Summary of Contents for GPSMAP 60CSx

Reviews:

Related manuals for GPSMAP 60CSx

Brands by name

Popular brands