Garmin GPSMAP 580 Owner'S Manual Download Page 6

Page: 6 / 124

WARNING:

See the Important Safety and Product Information

guide in the product box for product warnings and other
important information.

Caring for the GPSMAP 580/585

The case is constructed of high-quality materials and does not

require user maintenance, except cleaning.

Cleaning the Case

Clean the outer casing of the unit (except for the screen) using a

cloth dampened with a mild detergent solution and then wipe dry.

Avoid chemical cleaners and solvents that may damage plastic

components.

Cleaning the Screen

The unit’s lens is coated with a special anti-reflective coating that

is sensitive to skin oils, waxes and abrasive cleaners. Cleaners

containing ammonia, alcohol, abrasives, or anti-grease detergents

will harm the anti-reflective coating. It is important to clean the lens

using an eyeglass lens cleaner (that is specified as safe for anti-

reflective coatings) and a clean, lint-free cloth.

Water Immersion

The unit is waterproof to IEC Standard 60529 IPX7. It can

withstand immersion in 1 meter of water for 30 minutes. Prolonged

submersion can cause damage to the unit. After submersion, be

certain to wipe and air dry the unit before reuse.

Storage

Do not store the GPSMAP 580/585 where prolonged exposure to

temperature extremes might occur (such as in the trunk of a car) as

permanent damage could result.

GPSMAP 580/585 Owner’s Manual

Caring for the GPSMAP 580/585

Summary of Contents for GPSMAP 580





























































































































Search results

Summary of Contents for GPSMAP 580

Reviews:

Brands by name

Popular brands

Garmin GPSMAP 580, Owner'S Manual

Search results

Summary of Contents for GPSMAP 580

Reviews:

Brands by name

Popular brands