manualshive.com logo in svg

Garmin GPSMAP 580, Owner'S Manual

Share
Download
Garmin GPSMAP 580 Owner'S Manual Download Page 13

Zoom IN and Zoom OUT Keys

•  Press to adjust map zoom range. 

PAGE

 

Key

•  Press to cycle through the pages.

Quit

 Key

•  Press to cancel an unintended 

function.

MARK/

Enter

 Key

•  Press to select a highlighted 

option.

•  Press and hold to mark your 

current location as a waypoint.

NAV/MOB Key

•  Press to display the Navigate 

Menu

.

•  Press and hold to navigate to a man 

overboard (MOB) location.

Menu

 Key

•  Press to display the options 

Menu

 

for the current page.

•  Press twice to open the Main 

menu.

POWER Key

•  Press and hold to turn the unit on 

or off.

•  Press and release to adjust the 

backlighting.

Rocker

•  Press up, down, left, or right to 

highlight options and to 

Enter

 

data, or to pan the arrow   on the 

Map Page.

GPSMAP 580/585 Owner’s Manual 

7

 

Getting Started

Summary of Contents for GPSMAP 580





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands