Garmin GPSMAP 580 Page 12 Owner'S Manual Download

Page: 12 / 124

GPS Options

Press

Menu

twice to open the Main menu. Use the

Rocker

highlight the

GPS

tab. Press

Menu

to open the options Menu.

GPS Tab Options menu

Start/Stop Simulator

—starts and stops Simulator mode.

Enable/Disable WAAS

—enables or disables WAAS capability. See

the “

Appendix

” for more information about WAAS.

Track Up Skyview/North Up Skyview

—orients the sky view

display to North Up or Track Up.

New Location

—allows you to reset your location for simulation.

GPS Tips

• While the receiver is gathering information, your location

on the map might appear different from where you actually

are located. As soon as the receiver gathers enough satellite

information, your proper location appears on the map.

• Any time you have traveled more than 500mile (800km) with

the GPS receiver turned off, the receiver might take longer

than normal to find your location.

• The GPS receiver can lose satellite signals due to interference

from items such as buildings, tunnels, and trees.

• To learn about GPS, visit

www.garmin.com/aboutGPS/

GPSMAP 580/585 Owner’s Manual

Getting Started

Summary of Contents for GPSMAP 580





























































































































Search results

Summary of Contents for GPSMAP 580

Reviews:

Related manuals for GPSMAP 580

Brands by name

Popular brands

Garmin GPSMAP 580, Owner'S Manual

Search results

Summary of Contents for GPSMAP 580

Reviews:

Related manuals for GPSMAP 580

Brands by name

Popular brands