To set up Loran TD from the Main Menu:
1. Highlight the
Setup
tab on the Main Menu, and then highlight
the
Location
sub tab.
2. Highlight the
Location Format
field, and press
ENTER
.
Location Sub Tab
3. Highlight
Loran TD
, and press
ENTER
.
4. Highlight the
Setup
button located on the right side of the
Location Format
field, and press
ENTER
. The Loran TD
Setup window opens.
5. To change the settings of any of the five fields, highlight
the field, press
ENTER,
select a setting, and press
ENTER
again.
LORAN TD Setup
6. When finished, highlight the
Save
button, and press
ENTER
.
If the active GRI Chain, secondary stations, or offsets were changed
since the waypoint was created, the waypoint references the active
GRI chain and secondary stations and adjust the TD coordinates
accordingly. Remember that the GPS is not relying on the LORAN
signal for navigation and actually converts the TD coordinate to a
useful latitude and longitude coordinate before storing the waypoint
to memory or using it for navigation. Because of this, the unit can
navigate to a TD coordinate anywhere in the world.
You must know your GRI chain number and secondary stations
to create a LORAN TD position. For more information, read our
LORAN TD Position Format Handbook
, available at the Garmin
Web site at
www.garmin.com/support/userManual.html
.
GPSMAP 376C Owner’s Manual
125
A
PPENDIX
>
LORAN TD S
ETUP
190-00508-00_0C.indd 125
11/6/2006 9:47:48 AM
