Garmin GPSMAP 296 - Aviation GPS Receiver Pilot'S Manual Download Page 144

Page: 144 / 168

Using xImage for Customized Waypoint Symbols

xImage allows you to exchange images between your PC and your

GPSMAP 296. You can download and save screen shots of any

screen shown on your unit. xImage also allows you to download

customizable splash screens and waypoint symbols from compatible

GPS units, customize them (if you have an image editing program

on your PC), and send them back to your GPS unit.
You can download xImage from the Garmin Web site at

http://www.garmin.com/ximage/

. Refer to the help ﬁle for complete

instructions about using xImage.

Installing and Removing Data Cards

The GPSMAP 296 uses an optional Garmin data card to show

digital charts and maps. Install the data card in the slot located on

the bottom of the unit. Install or remove the data card at any time,

whether the unit is on or off.
You can load a variety of information on your data card, such as

BlueChart and MapSource detailed maps in a MapSource program.

You can buy pre-programmed cards to use with your GPSMAP 296.
Data cards are not waterproof, should not be exposed to moisture or

excessive static charges, and should be stored in the case supplied

with the card.

To install a data card:

1. Insert the card into the slot on the bottom of the unit. Be sure

the label is facing the front of the unit.

2. Firmly push the card into the unit. It is not necessary to force

the card. The handle is still exposed when it is properly

inserted.

3. If the unit is on, a conﬁrmation tone sounds. The ﬁrst time

you insert a programmed data card, the unit takes a few

seconds to read the card. When the data card has been

properly installed and accepted, a summary screen noting

the card details appears. Press

ENTER

to acknowledge.

If you insert a data card and get a card format not recognized

message, try removing the card and reinserting it. If the card is still

not recognized, contact Garmin Product Support or your Garmin

dealer.

To remove a data card:

1. Grasp the card handle. The handle expands for easy

removal.

2. Pull the card out of the card slot on the bottom of the unit.
3. If the unit is on, a conﬁrmation tone sounds when the data

card has been removed.

136

GPSMAP 296 Pilot’s Guide

PPENDIX

NSTALLATION

NFORMATION

Summary of Contents for GPSMAP 296 - Aviation GPS Receiver









































































































































































Search results

Summary of Contents for GPSMAP 296 - Aviation GPS Receiver

Reviews:

Related manuals for GPSMAP 296 - Aviation GPS Receiver

Brands by name

Popular brands

Garmin GPSMAP 296 - Aviation GPS Receiver, Pilot'S Manual

Search results

Summary of Contents for GPSMAP 296 - Aviation GPS Receiver

Reviews:

Related manuals for GPSMAP 296 - Aviation GPS Receiver

Brands by name

Popular brands