Garmin GPSMAP 190-00683-00 Owner'S Manual Download

Page: 124 / 152

Optional Accessories

In addition to the standard accessories included with your GPSMAP

378/478, several optional accessories are available to enhance the

operation of the GPSMAP 378/478.
To obtain replacement parts and optional accessories, contact

your Garmin Dealer, Garmin Product Support in the U.S.A. at

800/800.1020, or Garmin Europe at

44/0870.8501241.

WARNING:

Garmin accessories have been designed and

specifically tested for use with Garmin products. Accessories

offered by other manufacturers have not been tested or approved

for use with Garmin products. Use of such accessories could

cause damage to the GPSMAP 378/478 and void the warranty.

GA 29

GA 29F

, and

GA 26C Antennas

: Garmin remote antennas.

GXM 30

: The XM antenna. See

page 137

for subscription information.

Non-Skid Friction Mount

: Portable vehicle mount, no installation required.

Permanent and Temporary Adhesive Disks

: Adhesive disks for using the unit

in a vehicle.

PC Interface Cable

: Connects the unit to a serial port on your computer.

Power/Data Cable

: Allows you to connect the unit to the electrical system

using bare wires.

Programmable Data Cards

: Blank data cards available in 16 MB, 32 MB,

64 MB, 128 MB, 256 MB, and 512 MB sizes. Download detailed map data

from MapSource CD-ROMs to a data card, either directly through your

GPSMAP 378/478 using the PC USB cable, the optional PC Interface cable, or

with the optional USB Data Card Programmer.

USB Data Card Programmer

: Programs blank data cards at high speed

through a computer.

Carrying Case

: Protects the GPSMAP 378/478 when not in use; has storage

space for data cards.

Protective Cover

: Snaps on the front of the unit to protect the screen from

damage.

MapSource Software CD-ROMs

Enhances the basemap and creates

waypoints and routes from your computer. MapSource offers several

detailed mapping options that are compatible with the GPSMAP

378/478. See

www.garmin.com

for more information

Pre-Programmed Data Cards

: Data cards preprogrammed with BlueChart g2

or US Inland Lakes map data.

116

GPSMAP 378/478 Owner’s Manual

PPendIX

PtIonAl

ccessorIes

Summary of Contents for GPSMAP 190-00683-00

























































































































































Search results

Summary of Contents for GPSMAP 190-00683-00

Reviews:

Related manuals for GPSMAP 190-00683-00

Brands by name

Popular brands

Garmin GPSMAP 190-00683-00, Owner'S Manual

Search results

Summary of Contents for GPSMAP 190-00683-00

Reviews:

Related manuals for GPSMAP 190-00683-00

Brands by name

Popular brands