Garmin GPS 400W, Pilot'S Manual & Reference

Page: 74 / 214

3 - DIRECT-TO
64 190-00356-00 Rev B
Shortcuts
Shortcuts are available when using the direct-to
key, allowing you to bypass the use of the small and
large right knobs to enter the destination waypoint’s
identifier. A direct-to can be performed from any page
displaying a single waypoint identifier (such as the
WPT pages for airports and navaids) by simply press-
ing
direct-to and ENT . For pages that display a list
of waypoints (e.g., the nearest airport page) , you must
highlight the desired waypoint with the cursor before
pressing the
direct-to key.
To select an on-screen waypoint (other than the
map page) as a direct-to destination:
1. If a sngle arport, navad or user waypont s
dsplayed on-screen: press direct-to , then
press ENT twce.
2. If a lst of wayponts s dsplayed on-screen:
press the small right knob to actvate the
cursor, turn the large right knob to hghlght
the desred waypont, then press direct-to
followed by
ENT
twce.
Direct-to destinations may also be selected from
the map page , by panning to the desired destination
location and pressing direct-to and ENT (twice).
If no airport, navaid or user waypoint exists at the
desired location, a waypoint named “+MAP” will
automatically be created at the location of the pan-
ning pointer.
To select a direct-to destination from the map
page:
1. From the map page, press the small right
knob to dsplay a pannng ponter.
2. Turn the
small
and
large right
knobs to place
the pannng ponter at the desred destnaton
locaton.
3. If the pannng ponter s placed on an exstng
arport, navad or user waypont, the waypont
name wll be hghlghted. Press
direct-to and
then ENT twce to navgate to the waypont.
4. If the pannng ponter s placed on an open
locaton, press
direct-to
and
ENT
twce to
create a “MAP” waypont and navgate to t.
Direct-to Shortcuts