Garmin GPS 400W, Pilot'S Manual & Reference

Page: 85 / 214

4 - FLIGHT PLANS
75 190-00356-00 Rev B
Active Flight Plan Options
ng the orgnal flght plan untl cleared for the
approach—but, keeps the approach avalable
for quck actvaton when needed.
5. For approaches not approved for GPS, a
remnder wndow wll appear ndcatng that
GPS gudance on such approaches s strctly
for montorng only. To confirm ths remnder,
hghlght “Yes?” and press
ENT
.
Select Arrival
Select Arrival? allows you to select a published
standard terminal arrival route (STAR) for the destina-
tion airport, or replace the current arrival with a new
selection.
To select an arrival for a direct-to or flight plan
destination airport:
1. Select the “Select Arrval?” opton from the
actve flght plan page optons and press
ENT
.
2. A wndow wll appear lstng the avalable
transtons for your destnaton arport. Turn
the
small right knob to hghlght the desred
transton waypont and press ENT .
3. A second wndow wll appear lstng avalable
runways for the transton. Turn the small
right knob to hghlght the desred runway
and press ENT .
4. Wth “Load?” hghlghted, press ENT .
Select Departure
Select Departure? allows you to select a pub-
lished standard instrument departure (SID) for the
departure airport, or replace the current departure
with a new selection. When using a direct-to, the
400W-series will use the nearest airport as a reference
when displaying available departures. See Sec 5 - Pro-
cedures for information on selecting departures using
the
PROC key.
To select a departure for the departure airport:
1. Select the “Select Departure?” opton from
the actve flght plan page optons and press
ENT .
2. A wndow wll appear lstng the avalable
departures for your departure arport. Turn
the
small right
knob to select the desred
departure and press
ENT
.
3. A second wndow wll appear lstng avalable
transtons for the departure. Turn the small
right knob to hghlght the desred transton
waypont and press ENT .
4. Wth “Load?” hghlghted, press
ENT
.