Garmin GPS 400 Pilot'S Manual & Reference Download Page 57

Page: 57 / 244

GPS 400 Pilot’s Guide and Reference

190-00140-60 Rev. H

3-3

SECTION 3

DIRECT-TO NAVIGATION

Selecting a direct-to destination from the
active flight plan:

1) Press the

Direct-to

Key. The Select Direct-to

Waypoint Page appears, with the waypoint
identifier field highlighted.

2) Turn the large

right

knob to highlight the flight

plan (FPL) field (Figure 3-6).

Figure 3-6 Highlighted Flight Plan Field

3) Turn the small

right

knob to display a window

showing all waypoints in the active flight plan
(Figure 3-7).

Figure 3-7 FPL (Flight Plan) Window

4) Continue turning the small

right

knob to

scroll through the list and highlight the desired
waypoint.

5) Press the

ENT

Key to confirm the selected

waypoint, and press the

ENT

Key again to

activate the direct-to function.

Selecting the Nearest Airport as a Direct-to
Destination

The Select Direct-to Waypoint Page always displays the

nearest airports (from the present position) in the NRST
field. Nearby airports may also be selected as direct-to
destinations using the steps described in Section 7.1.

Selecting a nearby airport as a direct-to
destination:

1) Press the

Direct-to

Key. The Select Direct-to

Waypoint Page appears, with the waypoint
identifier field highlighted.

2) Turn the large

right

knob to highlight the

nearest airport (NRST) field.

3) Turn the small

right

knob to display a window

showing up to nine nearby airports (Figure 3-8).

Figure 3-8 Nearest Window

4) Continue turning the small

right

knob to

scroll through the list and highlight the desired
airport.

5) Press the

ENT

Key to confirm the selected air-

port, and press the

ENT

Key again to activate

the direct-to function.

Summary of Contents for GPS 400





















































































































































































































































Search results

Summary of Contents for GPS 400

Reviews:

Related manuals for GPS 400

Brands by name

Popular brands

Garmin GPS 400, Pilot'S Manual & Reference

Search results

Summary of Contents for GPS 400

Reviews:

Related manuals for GPS 400

Brands by name

Popular brands