Garmin GPS 400 Pilot'S Manual & Reference Download Page 148

Page: 148 / 244

GPS 400 Pilot’s Guide and Reference

190-00140-60 Rev. H

8-12

SECTION 8

AUX PAGES

8.3 UTILITy PAGE

The Utility Page (Figure 8-29) provides access (via menu

options) to

checklists, a count down/up timer, trip timers,

trip statistics, RAIM (Receiver Autonomous Integrity
Monitoring) prediction, sunrise/sunset time calculations,

software versions, database versions, and terrain database

version information. When a menu option is selected,

the corresponding page appears providing additional
information and features.

NOTe: Scroll down to view the last 3 items
(Software Versions, Database Versions, and
Terrain Database Versions) listed on the Utility
Page.

Figure 8-29 Utility Page

Current Page Group

Menu Options (to Select,

Highlight with Cursor and

Press the

ENT

Key)

Position of

Current Page

within Current

Page Group

Number of Pages in

Current Page Group

Selecting a menu option from the Utility
Page:

1) Press the small

right

knob momentarily, to

activate the flashing cursor (Figure 8-29).

2) Turn the large

right

knob to select the desired

menu option (Figure 8-30), and press the

ENT

Key (Figure 8-31).

Figure 8-30 Sunrise/Sunset Highlighted

Figure 8-31 Waypoint Field Highlighted

The following menu options are available:

• Checklists - Provides up to nine different user-

defined checklists containing up to 30 items each.

• Flight Timers - Provides count up/down

timers,

plus automatic recording of departure time and

total trip time. Departure and total trip time

recording can be configured to run either any time
GPS 400 power is on, or only when ground speed

exceeds 30 knots.

• Trip Statistics - Provides readouts for trip

odometers, average speed, and maximum speed.

These readouts are resettable (individually or all

at once) by pressing the

Key to display the

Trip Statistics Page Menu.

Summary of Contents for GPS 400





















































































































































































































































Search results

Summary of Contents for GPS 400

Reviews:

Related manuals for GPS 400

Brands by name

Popular brands

Garmin GPS 400, Pilot'S Manual & Reference

Search results

Summary of Contents for GPS 400

Reviews:

Related manuals for GPS 400

Brands by name

Popular brands