When the countdown timer reaches zero, you will be informed with a ‘Timer
expired’ message. The timer will then begin to count up, displaying the time since it
expired. The timer runs, if not altered, whenever the GPS 150XL is turned on.
The GPS 150XL
clock function
keeps track of both UTC time (Greenwich Mean
Time or Zulu Time calculated from the satellites) and local time, and allows you to
designate which format to use in all time displays. The local time and date can be set
without displaying local time on other GPS 150XL pages.
To set the local date/time:
1. Press
N
and rotate
O
until NAV Menu 2 is displayed.
2. Press
C
and rotate
O
until ‘Clock?’ is highlighted. Press
E
.
3. Use
K
to select either ‘utc’ or ’local’ time to be displayed in the time fields. Press
E
.
4. Use
K
and
O
to set the local date. Press
E
.
5. Use
K
and
O
to set the local time. Press
E
.
6. Press
C
to complete.
The GPS 150XL’s
trip timer
will automatically keep track of the duration of your
current trip and can be configured to run when the GPS 150XL is on, or only when your
ground speed exceeds a specified value (see Section 5).
To view or reset the trip timer:
1. Press
N
and rotate
O
until NAV Menu 2 is displayed.
2. Press
C
and rotate
O
until ‘Trip Time?’ is highlighted. Press
E
. The current time of
day, departure time and time enroute will be displayed.
3. To reset the timer, press
E
. To skip resetting the timer, press
C
.
27
To reset the trip timer, highlight ‘Reset?’ and
press
E
.
Clock function set to display local time in the time
fields of all other GPS 150XL pages.
SECTION
1
NAV KEY
Clock Function
Trip Timer
150xl manual B 8/4/98 1:09 PM Page 27
