Garmin G300 for Cessna SkyCatcher Pilot'S Manual Download Page 268

Page: 268 / 296

Garmin G300 Pilot’s Guide

190-00921-00 Rev. E

Appendix C

250

System

Overview

Flight

Instruments

EIS

COM

Interface

GPS

Navigation

Flight

Planning

Hazar

Avoidance

Additional

Featur

Integr

ated

Autopilot

Annun/Alerts

Appendix

Index

Exporting User Waypoints:

From the split-screen or full-screen MFD, press the

MENU

Key twice.

Turn or move the

FMS

Joystick to select ‘User Waypoints’ from the

Main Menu, and press the

ENT

Key.

With an SD card inserted, press the

Menu

Key.

Turn or move the

FMS

Joystick to select ‘Export Waypoints’ from the

Option Menu, and press the

ENT

Key.

IMPORTING/EXPORTING FLIGHT PLANS

Importing flight plans:

With a flight plan saved to the SD Card, press the

FPL

Key and turn the

FMS

Joystick to display the Flight Plan List Page.

Press the

IMPORT

Softkey.

Using the

FMS

Joystick highlight the desired flight plan to import.

Press the

IMPORT

Softkey again and press the

ENT

Key.

Exporting flight plans:

Press the

FPL

Key and turn the

FMS

Joystick to display the Flight Plan

List Page.

Press the

FMS

Joystick to activate the cursor, and turn or move the

FMS

Joystick to highlight the desired flight plan.

Press the

EXPORT

Softkey and press the

ENT

Key.

FLIGHT DATA LOGGING

The G300 also has the ability to log flight data. Refer to the Additional Features

section for more information.

Summary of Contents for G300 for Cessna SkyCatcher









































































































































































































































































































Search results

Summary of Contents for G300 for Cessna SkyCatcher

Reviews:

Related manuals for G300 for Cessna SkyCatcher

Brands by name

Popular brands

Garmin G300 for Cessna SkyCatcher, Pilot'S Manual

Search results

Summary of Contents for G300 for Cessna SkyCatcher

Reviews:

Related manuals for G300 for Cessna SkyCatcher

Brands by name

Popular brands