Garmin G300 for Cessna SkyCatcher Pilot'S Manual Download Page 127

Page: 127 / 296

Garmin G300 Pilot’s Guide

190-00921-00 Rev. E

109

GPS Navigation

System

Overview

Flight

Instruments

EIS

COM

Interface

GPS

Navigation

Flight

Planning

Hazar

Avoidance

Additional

Featur

Integr

ated

Autopilot

Annun/Alerts

Appendix

Index

New Waypoint Window

(POSITION Softkey Selected)

(Split-Screen)

New Waypoint Window

(REF WPTS Softkey Selected)

(Split-Screen)

With ‘Done’ highlighted, press the

ENT

Key.

Selecting and viewing nearest user waypoints:

Press the

NRST

Key.

Turn the

FMS

Joystick to select the Nearest USR Page.

Press the

FMS

Joystick to activate the cursor.

Turn the

FMS

Joystick to highlight the desired user waypoint.

Press the

ENT

Key to display the User Waypoint Information Window.

Editing or renaming a user waypoint:

Press the

MENU

Key twice to access the Main Menu.

Move the

FMS

Joystick to highlight ‘User Waypoints’ and press the

ENT

Key.

Move the

FMS

Joystick to highlight the appropriate waypoint and

press the

EDIT

Softkey. The Edit Waypoint Window is displayed.

Move the cursor to the desired field(s) and make any necessary
changes (to edit the Reference Waypoints, press the

REF WPTS

Softkey).

With ‘Done’ highlighted, press the

ENT

Key.

Summary of Contents for G300 for Cessna SkyCatcher









































































































































































































































































































Search results

Summary of Contents for G300 for Cessna SkyCatcher

Reviews:

Related manuals for G300 for Cessna SkyCatcher

Brands by name

Popular brands

Garmin G300 for Cessna SkyCatcher, Pilot'S Manual

Search results

Summary of Contents for G300 for Cessna SkyCatcher

Reviews:

Related manuals for G300 for Cessna SkyCatcher

Brands by name

Popular brands