Garmin G300 for Cessna SkyCatcher Pilot'S Manual Download Page 129

Page: 129 / 296

Garmin G300 Pilot’s Guide

190-00921-00 Rev. E

111

GPS Navigation

System

Overview

Flight

Instruments

EIS

COM

Interface

GPS

Navigation

Flight

Planning

Hazar

Avoidance

Additional

Featur

Integr

ated

Autopilot

Annun/Alerts

Appendix

Index

Exporting User Waypoints:

From the split-screen or full-screen MFD, press the

MENU

Key twice.

Turn or move the

FMS

Joystick to select ‘User Waypoints’ from the

Main Menu, and press the

ENT

Key.

With an SD card inserted, press the

Menu

Key.

Turn or move the

FMS

Joystick to select ‘Export Waypoints’ from the

Option Menu, and press the

ENT

Key.

5.5 AIRSPACE

The G300 can display the following types of airspaces: Class B/TMA, Class C/

TCA, Class D, Restricted, MOA (Military), Other Airspace, Air Defense Identification
Zone (ADIZ), and Temporary Flight Restriction (TFR).

The Nearest Airspace Page and Airspace Alerts provide information about

airspaces and the location of the aircraft in relationship to them. The Nearest
Airspace Page can be used to quickly find airspaces close to the flight path.

The Nearest Airspace Page displays the class of airspace, controlling agency,

vertical boundaries, and status.

Selecting and viewing nearest airspaces:

Press the

NRST

Key.

Turn the

FMS

Joystick to select the Nearest Airspace Page.

Press the

FMS

Joystick to highlight the nearest airspace. Turn or move

the

FMS

Joystick to highlight the desired airspace.

Press the

ENT

Key to display the Airspace Information Page.

Press the

FREQS

Softkey (if available) to display frequency and

additional airport information similar to the Waypoint Information
Page.

Summary of Contents for G300 for Cessna SkyCatcher









































































































































































































































































































Search results

Summary of Contents for G300 for Cessna SkyCatcher

Reviews:

Related manuals for G300 for Cessna SkyCatcher

Brands by name

Popular brands

Garmin G300 for Cessna SkyCatcher, Pilot'S Manual

Search results

Summary of Contents for G300 for Cessna SkyCatcher

Reviews:

Related manuals for G300 for Cessna SkyCatcher

Brands by name

Popular brands