Garmin G1000H, Cockpit Reference Manual

Page: 58 / 136

Garmin G1000H
™
Cockpit Reference Guide for the Bell 407GX 190-01254-00 Rev. A
42
Procedures
Flight
Instruments
EICAS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal Oper
ation
Annun/
Alerts
Appendix
Index
4)
Turn the large
FMS
Knob to highlight the desired arrival.
5) Press the ENT Key. A list of transitions is displayed for the selected arrival.
6)
Turn either
FMS Knob
to select the desired transition.
7) Press the ENT Key. A list of runways may be displayed for the selected
arrival.
8)
Turn the large
FMS
Knob to highlight the desired runway.
9)
Press the
ENT
Key.
10)
With ‘LOAD?’ highlighted, press the
ENT
Key.
11)
The arrival becomes part of the active flight plan.
12)
If an altitude associated with a waypoint in an arrival procedure is to be
used to calculate vertical guidance perform the following steps:
a)
Press the
FMS
Knob to activate the cursor.
b)
Turn the large FMS Knob to highlight the desired waypoint altitude.
c)
Press the
ENT
Key to designate the altitude for use in giving vertical
guidance.
ACTIVATE AN ARRIVAL LEG
1) Press the FPL Key to display the active flight plan.
2)
Press the
FMS
Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the desired waypoint within the
arrival.
4) Press the ACT LEG Softkey. A confirmation window showing the selected
leg is displayed.
5) With ‘ACTIVATE’ highlighted, press the ENT Key.
LOAD AND/OR ACTIVATE AN APPROACH PROCEDURE
NOTE: If certain GPS parameters (SBAS, RAIM, etc.) are not available, some
published approach procedures for the desired airport may not be displayed
in the list of available approaches.
1)
Press the
PROC
Key.
2) Turn the large FMS Knob to highlight ‘SELECT APPROACH’.